How to Connect Both Skullcandy Push Bluetooth Earbuds

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This post may contain affiliate links, which means I may receive a small commission at no extra cost to you.

Hey there! If you’re here, chances are you’ve just snagged a pair of Skullcandy Push earbuds, or you’re already enjoying them, but you’re having a little trouble getting them both connected to your device. Don’t worry, it’s a common hiccup, and I’m here to walk you through it. Getting both earbuds working seamlessly is the key to enjoying that rich, immersive audio experience Skullcandy is known for.

We’ll cover everything from the initial pairing process to troubleshooting common issues. I’ll break down the steps clearly and concisely, making sure you get those earbuds synced up and ready to go. Whether you’re an Android aficionado or an Apple enthusiast, these instructions are designed to work for you. Let’s get started and get you listening!

Understanding Your Skullcandy Push Earbuds

Before we jump into the connection process, let’s get acquainted with your Skullcandy Push earbuds. Understanding their components and functions will make the process smoother. The Skullcandy Push earbuds, like many true wireless earbuds, rely on a primary or “master” earbud that connects directly to your device and then relays the audio to the secondary earbud. The charging case is crucial; it not only stores and protects your earbuds but also charges them. Make sure it’s fully charged for the best experience.

Key Components and Features

Earbuds: These are the stars of the show, delivering the audio. Each earbud has a button or touch control for various functions.
Charging Case: This is your lifeline. It charges the earbuds and helps with pairing.
Bluetooth Connectivity: The magic behind the wireless connection.
Controls: Volume, track skipping, and call answering are usually at your fingertips.

Initial Setup: Unboxing and Charging

When you first unbox your Skullcandy Push earbuds, you’ll want to charge them fully. The charging case typically has a small LED indicator that shows the charging status. While they’re charging, take a moment to familiarize yourself with the controls on each earbud. This will save you time later. The earbuds themselves should also have a small LED indicator to show their charging status.

A full charge usually takes around an hour, and the charging case should hold several additional charges. Ensure both the case and the earbuds are fully charged before attempting to connect them to your device. This is crucial for a smooth setup.

Connecting Your Skullcandy Push Earbuds: Step-by-Step Guide

Now, let’s dive into the core of the matter: connecting your Skullcandy Push earbuds. The process is straightforward, but it’s essential to follow the steps precisely to avoid any confusion. I’ll provide separate guides for both Android and iOS users.

Pairing for the First Time

Take the earbuds out of the charging case. This action usually automatically puts them in pairing mode. The LED lights on the earbuds will start flashing, indicating they are ready to connect.
Enable Bluetooth on your device (phone, tablet, etc.). Go to your device’s settings and turn on Bluetooth.
Find “Skullcandy Push” in the list of available devices. The name might vary slightly depending on the specific model. Tap on it to initiate the pairing process.
Accept any pairing requests. Your device might ask you to confirm the connection.
Check for successful connection. Once paired, you should see “Connected” next to the Skullcandy Push in your Bluetooth settings.

If you’re having trouble, make sure the earbuds are close to your device during the pairing process. Also, ensure that no other devices are trying to connect to the earbuds simultaneously, as this can cause interference. If you still face issues, try resetting the earbuds (instructions below).

Pairing with Android Devices

The process is similar to the general pairing procedure, but here are some Android-specific tips to keep in mind:

Open your Android device’s Settings app.
Tap on “Connections” or “Bluetooth.” (The exact wording might vary depending on your Android version.)
Toggle the Bluetooth switch to “On.”
Look for “Skullcandy Push” in the list of available devices.
Tap on “Skullcandy Push” to pair. You might see a pairing request; accept it to complete the connection.
Once connected, you should see “Connected” under the device name.

Android devices often have a more integrated Bluetooth experience, so you might see additional options, such as the ability to check the battery level of your earbuds directly from the Bluetooth settings.

Pairing with iOS Devices (iphones and Ipads)

iOS devices also offer a seamless Bluetooth pairing experience. Here’s how to connect your Skullcandy Push earbuds to your iPhone or iPad:

Open the Settings app on your iPhone or iPad.
Tap on “Bluetooth.”
Make sure the Bluetooth switch is toggled to “On.”
Look for “Skullcandy Push” in the list of available devices.
Tap on “Skullcandy Push” to pair. You might see a pairing request; accept it.
Once connected, you’ll see “Connected” next to the device name.

iOS devices also provide the added benefit of being able to see the battery percentage of your earbuds in the Bluetooth settings, which is a convenient feature to keep track of your battery life.

Troubleshooting Common Connection Issues

Even with the best instructions, you might encounter some hiccups. Here are some common problems and their solutions:

One Earbud Not Working

This is probably the most frequent issue. Here’s how to fix it:

Put both earbuds back in the charging case. Close the lid and wait a few seconds.
Take both earbuds out of the case. They should automatically try to connect to each other.
Check your device’s Bluetooth settings. Make sure both earbuds are connected and not listed separately.
If the problem persists, try forgetting the “Skullcandy Push” device in your Bluetooth settings and re-pairing.

If only one earbud is connected, it often means the earbuds haven’t properly synced with each other. Resetting the connection usually fixes this.

Bluetooth Not Connecting

If your device can’t find the earbuds, try these steps:

Ensure the earbuds are in pairing mode. The LED lights should be flashing.
Make sure Bluetooth is enabled on your device.
Move the earbuds closer to your device.
Restart your device and the earbuds.
Check for interference. Move away from other Bluetooth devices or Wi-Fi routers.

Bluetooth interference from other devices or the distance between the earbuds and your device can often be the culprit. A simple restart can often clear up minor software glitches.

Sound Quality Issues

If the sound quality is poor, try these fixes:

Ensure both earbuds are properly seated in your ears.
Adjust the volume on both your device and the earbuds.
Check for interference. Move away from other Bluetooth devices or Wi-Fi routers.
Try resetting the earbuds and re-pairing them.

Poor sound quality can be caused by physical issues, like a poor fit in your ear, or external interference. Also, check your device’s equalizer settings, as they might be affecting the sound.

Resetting Your Skullcandy Push Earbuds

If all else fails, resetting your earbuds can often resolve persistent connection issues. Here’s how to reset the Skullcandy Push earbuds:

Place both earbuds in the charging case.
Close the lid for about 10 seconds.
Open the lid and take the earbuds out.
Delete the “Skullcandy Push” device from your device’s Bluetooth settings.
Put the earbuds back in the charging case.
Close the lid and then open it. The earbuds should now be in pairing mode.
Re-pair the earbuds with your device.

Resetting the earbuds clears their memory and forces them to reconnect, often resolving deeper connectivity problems. After the reset, the earbuds should start as if they are new.

Advanced Tips and Tricks

Once you’ve mastered the basics, here are some advanced tips to enhance your Skullcandy Push experience.

Understanding Earbud Controls

Each earbud usually has controls for various functions. Understanding these controls will make your life easier. For example, you might be able to:

Answer/End Calls: Usually a single tap on either earbud.
Play/Pause Music: Usually a single tap on either earbud.
Skip Tracks: Usually a double tap on the right earbud to skip forward and a double tap on the left earbud to skip back.
Adjust Volume: Usually a tap and hold on either earbud to increase or decrease the volume.
Activate Voice Assistant: Often a tap and hold on either earbud.

Refer to the user manual for the exact controls specific to your model, as they can sometimes vary.

Maximizing Battery Life

Battery life is crucial for a great listening experience. Here’s how to get the most out of your Skullcandy Push earbuds:

Always fully charge the earbuds and the charging case.
Store the earbuds in the charging case when not in use. This protects them and keeps them charged.
Avoid extreme temperatures. Heat and cold can affect battery life.
Turn off the earbuds when not listening. Even when not connected, the earbuds might drain the battery.

Proper battery management is key to ensuring you always have power when you need it.

Using the Earbuds with Multiple Devices

You can often pair your Skullcandy Push earbuds with multiple devices, but only one device can be connected at a time. Here’s how to switch between devices:

Unpair from the current device. Go to your Bluetooth settings and disconnect or forget the earbuds.
Pair with the new device. Put the earbuds in pairing mode and connect them to your other device.
The earbuds will automatically connect to the last connected device.

Switching between devices is usually a quick process, but make sure to disconnect from the current device before connecting to a new one to avoid conflicts.

Cleaning and Maintenance

Regular cleaning can ensure your earbuds last longer and sound better. Here’s how to clean your Skullcandy Push earbuds:

Wipe down the earbuds with a soft, dry cloth.
Use a cotton swab to clean the ear tips and any mesh screens.
Avoid using water or cleaning solutions.
Store the earbuds in a clean and dry place.

Regular cleaning prevents the build-up of earwax and debris, which can affect sound quality and earbud performance.

Troubleshooting Specific Scenarios

Let’s look at some specific scenarios you might encounter and how to address them.

Earbuds Not Charging

If your earbuds aren’t charging, check these things:

Make sure the charging case is charged.
Ensure the earbuds are correctly placed in the charging case.
Clean the charging contacts on both the earbuds and the case.
Try a different charging cable or power source.

Charging issues often stem from a bad connection or a depleted charging case.

Audio Dropping Out

If you experience audio dropouts, try these steps:

Ensure the earbuds are within range of your device.
Minimize interference from other devices.
Restart your device and the earbuds.
Reset the earbuds.

Audio dropouts are often caused by interference or distance issues.

Microphone Not Working

If the microphone isn’t working during calls, try this:

Ensure the microphone isn’t blocked by anything.
Make sure the earbuds are properly connected to your device.
Test the microphone with different apps or calls.
Reset the earbuds.

Sometimes, the microphone can be disabled in the settings of your device or the app you’re using.

Pairing with a New Device After Previous Use

If you’re switching to a new device, follow these steps:

Unpair the earbuds from your previous device.
Put the earbuds in pairing mode.
Pair the earbuds with your new device.

This ensures there aren’t any conflicts from the previous connection.

Skullcandy Push vs. Other Earbuds

How do the Skullcandy Push earbuds stack up against other popular true wireless earbuds? Let’s take a look at a quick comparison.

Feature	Skullcandy Push	Competitor A	Competitor B
Price	Generally mid-range	Varies	Varies
Sound Quality	Good bass, balanced	Varies	Varies
Battery Life	Up to 6 hours (earbuds), plus case	Varies	Varies
Water Resistance	IPX4	Varies	Varies
Controls	Button controls	Varies	Varies

The Skullcandy Push earbuds offer a good balance of features, sound quality, and price. When choosing between different earbuds, consider your priorities, such as sound quality, battery life, and budget. Researching reviews will help you make a well-informed decision.

Verdict

Connecting your Skullcandy Push earbuds is a straightforward process when you know the steps. By following the guide, you should have both earbuds working in no time. Remember to charge them fully, check the Bluetooth settings, and try the troubleshooting steps if you run into any issues. Enjoy your music!

You should now be well-equipped to connect your Skullcandy Push earbuds and enjoy your music. Remember, patience and persistence are key. If you are having trouble, revisit the steps, double-check your settings, and don’t hesitate to reset the earbuds. With a bit of troubleshooting, you’ll be listening to your favorite tunes in no time.

If you continue to have trouble, consider checking the Skullcandy website for the latest FAQs or contacting their customer support. They can offer specific assistance tailored to your model and any technical issues you might be experiencing. Happy listening!

Recommended Products

Bestseller No. 1