How Do You Connect Skullcandy Wireless Earbuds? A Guide

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This post may contain affiliate links, which means I may receive a small commission at no extra cost to you.

So, you’ve got yourself a shiny new pair of Skullcandy wireless earbuds – awesome! Whether you’re into the sleek simplicity of the Jib True, the sporty feel of the Push Active, or the premium sound of the Indy Evo, the first step is always the same: connecting them to your device. But how do you actually do it? Don’t worry, it’s easier than you think. This guide will walk you through the process, step-by-step, for various Skullcandy models and devices.

We’ll cover everything from the initial pairing to troubleshooting common connection issues. We’ll also explore some helpful tips and tricks to make sure you get the most out of your Skullcandy earbuds. Get ready to enjoy your music, podcasts, and calls with crystal-clear audio. Let’s get started!

Understanding Bluetooth and Your Earbuds

Before we dive into the connection process, let’s quickly touch on Bluetooth. Bluetooth is a wireless technology that allows devices to communicate with each other over short distances. Your Skullcandy earbuds use Bluetooth to connect to your phone, tablet, or computer. This means you don’t need any wires to enjoy your audio. The range usually extends to about 30 feet, depending on the environment and any potential obstructions.

The process involves ‘pairing’ your earbuds with your device. Pairing is essentially creating a secure connection between the two devices. Once paired, your device will automatically recognize your earbuds whenever they’re within range and turned on. However, if you are experiencing issues, sometimes you will need to ‘forget’ your device and then re-pair it.

What You’ll Need

To connect your Skullcandy wireless earbuds, you’ll need the following:

Your Skullcandy wireless earbuds, fully charged or with sufficient battery life.
A device with Bluetooth capabilities (smartphone, tablet, laptop, etc.).
The device’s Bluetooth turned on.

Connecting to Your Smartphone (android & Ios)

Connecting your Skullcandy earbuds to your smartphone is typically the most common scenario. The process is similar for both Android and iOS devices, with only slight differences in the menu navigation. Here’s how to do it:

For Android Devices

Make sure your earbuds are charged. Check the charging case or the earbuds themselves for any LED indicators showing battery life.
Enable Bluetooth on your Android device. Swipe down from the top of your screen to access the quick settings menu. Look for the Bluetooth icon and tap it to turn it on. If you don’t see it, you may need to swipe again to reveal more settings.
Put your Skullcandy earbuds into pairing mode. The method for this varies slightly depending on the model. Generally, this involves pressing and holding the power button on both earbuds, or the button on the charging case. Refer to your specific model’s manual if you are unsure. The earbuds will typically flash a light, indicating that they are in pairing mode.
Open your device’s Bluetooth settings. Go to Settings > Connections > Bluetooth. The exact path might differ slightly depending on your Android version and manufacturer.
Scan for available devices. Your phone will automatically start searching for nearby Bluetooth devices.
Select your Skullcandy earbuds from the list. They should appear with their model name (e.g., “Skullcandy Indy Evo”). Tap on the name to initiate the pairing process.
Accept any pairing requests. You might be prompted to confirm the pairing. Tap “Pair” or “OK.”
Your earbuds are now connected! You should see the earbuds listed as “Connected” in your Bluetooth settings. You can now start playing audio, and it will be routed through your earbuds.

For iOS (iphone/ipad) Devices

Ensure your earbuds have power. Check the charging case or the earbuds themselves for battery indicators.
Turn on Bluetooth on your iPhone or iPad. Open the Settings app and tap on “Bluetooth.” Toggle the Bluetooth switch to the on position.
Put your Skullcandy earbuds in pairing mode. As with Android, the specific steps depend on your model. Typically, you’ll press and hold the power button on both earbuds, or the button on the charging case. The earbuds will usually flash a light to indicate pairing mode. Consult your manual if needed.
Scan for devices. Your iPhone/iPad will automatically search for available Bluetooth devices.
Select your Skullcandy earbuds from the list. The name of your earbuds will appear (e.g., “Skullcandy Push Active”). Tap on the name.
Confirm the pairing. You might see a pairing request. Tap “Pair” to confirm.
Enjoy your music! Once connected, your earbuds will appear as “Connected” in the Bluetooth settings. Audio playback will now be through your earbuds.

Connecting to a Laptop or Computer

Connecting your Skullcandy earbuds to a laptop or computer is similar to connecting to a smartphone, but the exact steps might vary slightly depending on your operating system (Windows, macOS, etc.).

Connecting to a Windows Pc

Make sure your earbuds are charged. Check the battery status.
Enable Bluetooth on your Windows PC. Click the Windows Start button, then click the Settings icon (the gear). Select “Devices” and then “Bluetooth & other devices.” Make sure Bluetooth is turned on.
Put your Skullcandy earbuds into pairing mode. Follow the instructions specific to your earbud model (usually, pressing and holding the power button on both earbuds or on the charging case).
Add a Bluetooth device. In the Bluetooth & other devices settings, click “Add Bluetooth or other device.”
Select “Bluetooth.” Your PC will start searching for nearby Bluetooth devices.
Choose your Skullcandy earbuds. Select your earbuds from the list of available devices.
Follow any on-screen prompts. You might need to enter a pairing code (usually “0000” or “1234”) or confirm the connection.
Your earbuds are now connected. You should see your earbuds listed as connected in the Bluetooth settings. You can now play audio from your computer through your earbuds.

Connecting to a Macos Computer

Ensure your earbuds have sufficient power. Check the battery level.
Turn on Bluetooth on your Mac. Click the Apple menu (top-left corner of your screen) and select “System Preferences.” Click on “Bluetooth.” Ensure that Bluetooth is turned on.
Put your Skullcandy earbuds into pairing mode. Use the pairing method specific to your earbud model (typically, pressing and holding the power button on both earbuds or on the charging case).
Select your earbuds from the list. Your Mac will automatically search for Bluetooth devices. Your Skullcandy earbuds should appear in the list. Click “Connect” next to your earbuds.
Your earbuds are now connected. Once connected, you can start playing audio from your Mac, and it will be routed through your earbuds. You can manage the audio output in System Preferences > Sound.

Troubleshooting Common Connection Issues

Sometimes, you might run into issues when connecting your Skullcandy earbuds. Here are some common problems and how to fix them:

Earbuds Not Appearing in the Bluetooth List

If your earbuds aren’t showing up in the list of available devices, try these solutions:

Make sure your earbuds are in pairing mode. Double-check that you’ve followed the correct steps for putting your earbuds into pairing mode.
Ensure Bluetooth is turned on. Make sure Bluetooth is enabled on your device.
Check the battery level. Low battery can sometimes interfere with Bluetooth connections. Charge your earbuds.
Move closer to your device. Bluetooth has a limited range. Try moving your earbuds and your device closer together.
Restart your earbuds and your device. Sometimes, a simple restart can resolve connection issues.
Reset your earbuds. Some Skullcandy models have a reset function. Consult your manual to find out how to reset your specific model.
Forget and re-pair the device. In your device’s Bluetooth settings, “forget” your earbuds and then try pairing them again from scratch.

Earbuds Connected, but No Sound

If your earbuds are connected but you’re not hearing any sound, try these solutions:

Check the volume. Make sure the volume is turned up on both your earbuds and your device.
Select the correct audio output. In your device’s audio settings, make sure your Skullcandy earbuds are selected as the audio output device.
Restart your earbuds and your device. A simple restart can often fix this issue.
Check for interference. Other Bluetooth devices or Wi-Fi routers can sometimes interfere with the Bluetooth signal. Try moving away from potential sources of interference.
Update your device’s software. Make sure your phone, tablet, or computer has the latest software updates.
Reset your earbuds. As mentioned before, some models have a reset function; refer to your manual.

One Earbud Not Working

If only one earbud is producing sound, try these solutions:

Check the balance settings. In your device’s audio settings, make sure the audio balance is centered.
Ensure both earbuds are charged. Sometimes, one earbud might have a lower battery level and might not function correctly.
Restart the earbuds. Turn both earbuds off and then back on.
Reset the earbuds. A reset can sometimes resolve this issue.
Re-pair the earbuds. Disconnect the earbuds from your device, and then re-pair them. Make sure that you initiate the pairing process with both earbuds out of the charging case.
Contact Skullcandy support. If none of these steps work, there might be a hardware issue. Contact Skullcandy customer support for assistance.

Tips and Tricks for a Better Experience

Here are some tips and tricks to get the most out of your Skullcandy wireless earbuds:

Keep your earbuds charged. Regularly charging your earbuds will ensure they’re always ready to use.
Update the firmware. Check the Skullcandy app or website for firmware updates for your specific earbud model. Firmware updates can improve performance and fix bugs.
Clean your earbuds regularly. Use a soft, dry cloth to clean your earbuds. Avoid using water or harsh chemicals.
Learn the touch controls. Most Skullcandy earbuds have touch controls for playing/pausing music, answering calls, and adjusting volume. Refer to your manual to learn the specific controls for your model.
Customize your sound. Some Skullcandy models have an app that allows you to customize the sound settings. Explore the app to find your preferred sound profile.
Use the Skullcandy app (if available). The Skullcandy app often provides additional features, such as EQ settings, firmware updates, and the ability to locate lost earbuds.
Store your earbuds properly. When not in use, store your earbuds in their charging case to protect them and keep them charged.

Skullcandy Earbud Model-Specific Considerations

While the general connection process remains consistent across most Skullcandy models, there can be slight variations. It is always best to consult your specific model’s user manual for detailed instructions. Here’s a brief overview of some popular Skullcandy models and any unique considerations:

Skullcandy Jib True

The Jib True is a popular budget-friendly option. Pairing mode is typically activated by pressing and holding the button on each earbud simultaneously. Make sure both earbuds are out of the charging case when you pair them. The Jib True might require you to pair one earbud first, then the other, but follow the on-screen prompts carefully. You will find that these earbuds do not have an app to control them.

Skullcandy Push Active

The Push Active earbuds are designed for active lifestyles. They often feature a more secure fit and may have slightly different pairing procedures. Usually, you activate pairing by pressing and holding the button on the charging case. These earbuds typically feature the Skullcandy app for customization and Tile integration (if enabled).

Skullcandy Indy Evo

The Indy Evo offers a balance of features and affordability. Pairing is typically initiated by removing the earbuds from the charging case and entering pairing mode automatically. These earbuds have the Skullcandy app for sound customization and Tile integration.

Skullcandy Dime

The Dime earbuds are known for their compact size. Pairing is often done by taking the earbuds out of the case. They usually pair quickly. The Dime earbuds often have a very simple user experience, with a focus on ease of use. They don’t have an app.

Skullcandy Sesh Evo

The Sesh Evo earbuds are a reliable and affordable option. Pairing is done in a similar manner to the Indy Evo. They offer basic functionality and are easy to set up. These earbuds do not have an app.

Model-Specific Manuals

Remember that the best source of information for your specific model is the user manual that came with your earbuds. If you’ve lost the manual, you can usually find a digital copy on the Skullcandy website or by searching online for “[Your Skullcandy Model] User Manual.”

Pairing Multiple Devices

Most Skullcandy earbuds can only be connected to one device at a time. However, you can easily switch between devices. For example, if you’re connected to your laptop and want to connect to your phone, simply disconnect from your laptop and put your earbuds back into pairing mode. Then, connect to your phone. The earbuds will remember previously paired devices, making it easy to switch back and forth.

Some higher-end models might support multipoint pairing, which allows you to connect to two devices simultaneously. Check your specific model’s specifications to see if it supports this feature.

The Importance of a Good Connection

A stable Bluetooth connection is crucial for enjoying your Skullcandy earbuds. A good connection ensures clear audio, minimal dropouts, and a seamless listening experience. Bluetooth technology has improved over the years, but environmental factors (like other wireless signals) can still affect the connection. By following the tips and troubleshooting steps in this guide, you can maximize the quality of your Bluetooth connection and get the most out of your earbuds.

Final Verdict

Connecting your Skullcandy wireless earbuds is a straightforward process. By following the steps outlined in this guide, you should be able to quickly pair your earbuds with your device and start enjoying your favorite audio. Remember to consult your specific model’s user manual for detailed instructions and to troubleshoot any issues you might encounter. With a little patience, you’ll be listening to your tunes in no time!

Connecting your Skullcandy wireless earbuds is a simple process, typically involving putting the earbuds into pairing mode and selecting them from your device’s Bluetooth settings. The steps are similar across Android, iOS, and computer devices, although the exact menu navigation might differ slightly. Should you encounter issues, troubleshooting steps such as ensuring the earbuds are charged, restarting devices, and forgetting/re-pairing the earbuds often resolve the problem.

Understanding Bluetooth basics, along with the specific pairing instructions for your Skullcandy model, is key to a successful connection. By following these guidelines, you can ensure a smooth setup and enjoy your Skullcandy earbuds to the fullest. Remember to keep the earbuds charged and use the Skullcandy app (if available) for added features.

Recommended Products

SaleBestseller No. 1