How to Charge Sesh Evo Earbuds: A Complete Guide

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This post may contain affiliate links, which means I may receive a small commission at no extra cost to you.

Hey there! If you’re rocking a pair of Skullcandy Sesh Evo earbuds, you’re probably loving the freedom of wireless audio. But, like all wireless gadgets, they need power. Knowing how to charge your Sesh Evo earbuds properly is crucial to keep the music playing. Don’t worry, it’s a straightforward process, but there are a few nuances that can maximize the lifespan and performance of your earbuds.

This guide will walk you through every step, from the basics to some helpful tips and troubleshooting advice. We’ll cover everything from the initial charge to ensuring you get the most out of your earbuds’ battery life. So, let’s get those Sesh Evos juiced up and ready to go!

Getting Started: What You’ll Need

Before you begin, make sure you have everything you need. This is a quick checklist to ensure a smooth charging experience:

Your Skullcandy Sesh Evo earbuds. Obviously!
The charging case. This is the heart of the charging process.
A USB-C charging cable. Skullcandy provides this in the box, but if you’ve misplaced it, any USB-C cable will do.
A power source. This could be a USB wall adapter, a computer, a power bank, or even your car’s USB port.

Charging the Earbuds: Step-by-Step

The charging process is simple, but here’s a detailed breakdown to ensure you get it right:

Place the Earbuds in the Case: Ensure your Sesh Evo earbuds are properly seated inside the charging case. You should see them snugly fit into their respective slots. Make sure the earbuds’ charging contacts align with the charging pins in the case.
Close the Case Lid: Once the earbuds are in place, close the case lid. This is essential for the charging process to begin.
Connect the Charging Case: Take your USB-C cable and plug the USB-C end into the charging port on the case. The charging port is usually located on the bottom of the case.
Connect to a Power Source: Plug the other end of the USB-C cable into your chosen power source. This could be a USB wall adapter, a computer’s USB port, or any other compatible power source.
Check the Indicators: Observe the LED indicators on the charging case. These lights will show you the charging status. The exact behavior of the lights might vary, but generally:
- Charging Case: The case’s LED will usually blink or pulse while it’s charging. Once fully charged, the LED will typically remain solid.
- Earbuds: When the earbuds are charging inside the case, the LED indicators on the earbuds themselves might also illuminate. These often turn solid when the earbuds are fully charged.
Wait for the Charge: Allow the earbuds and the case to charge fully. The time it takes will vary depending on the power source and the current battery level. A full charge for both the earbuds and the case typically takes around 1-2 hours.
Disconnect: Once the case and earbuds are fully charged, disconnect the USB-C cable from the power source and the charging case. You’re now ready to use your Sesh Evo earbuds!

Understanding the LED Indicators

The LED indicators are your best friends when it comes to understanding the charging status of your Sesh Evo earbuds. Here’s a quick guide to what those lights mean:

Charging Case LED:

The charging case LED provides information about the charging status of the case itself and the earbuds inside. The exact behavior can differ slightly depending on the specific model and firmware version, but here are some common scenarios:

Solid Red: The case is charging, and the battery level is low.
Flashing Red: The case is charging, and the battery level is somewhere in the middle.
Solid Green: The case is fully charged.
Flashing Blue: The case is in pairing mode (when you’re connecting to a device).
Earbud LEDs:

The LED indicators on the earbuds themselves offer insights into their individual charging status. Again, the exact behavior can vary, but here are some common interpretations:

Solid Red: The earbud is charging.
Solid Blue or Green: The earbud is fully charged.
Flashing Red: The earbud battery is critically low.
No Light: The earbud is either fully charged, turned off, or not connected properly in the case.

Important Note: Always refer to the official Skullcandy Sesh Evo user manual for the most accurate and up-to-date information on LED indicator behavior. The manual often provides detailed explanations specific to your model.

Charging Times and Battery Life

Knowing the charging times and expected battery life can help you plan your usage and avoid any unexpected interruptions. Here’s a general overview for the Sesh Evo:

Earbuds Charging Time: Approximately 1 hour for a full charge.
Charging Case Charging Time: Approximately 1 hour for a full charge.
Earbuds Battery Life: Up to 5 hours of playtime on a single charge.
Total Battery Life with Case: Up to 19 hours of total playtime (including the case’s charges).

Tips for Maximizing Battery Life:

Charge Regularly: Don’t wait until the battery is completely drained before charging. Charging the earbuds and case regularly helps maintain battery health.
Avoid Extreme Temperatures: Extreme heat or cold can negatively impact battery performance. Avoid leaving your earbuds in direct sunlight or freezing temperatures.
Turn Off When Not in Use: If you’re not using the earbuds, turn them off to conserve battery power.
Store Properly: Store the earbuds in the charging case when not in use to protect them and keep them charged.
Clean the Charging Contacts: Occasionally, clean the charging contacts on both the earbuds and the case with a dry, soft cloth. This ensures a good connection for charging.

Troubleshooting Common Charging Issues

Sometimes, you might encounter issues while charging your Sesh Evo earbuds. Here are some common problems and their solutions:

Earbuds Not Charging:

If your earbuds aren’t charging, check the following:

Charging Contacts: Ensure the earbuds are properly seated in the case and that the charging contacts are clean.
Charging Case: Make sure the charging case itself is charged.
USB-C Cable: Try a different USB-C cable to see if the original cable is faulty.
Power Source: Test a different power source (wall adapter, computer USB port, etc.).
Reset the Earbuds: Sometimes, a reset can resolve charging issues. To reset, place the earbuds in the charging case, close the lid, and wait a few seconds. Then, open the lid and try charging again.

Charging Case Not Charging:

If the charging case isn’t charging, consider these points:

USB-C Cable: Test a different USB-C cable.
Power Source: Try a different power source.
Charging Port: Inspect the charging port on the case for any damage or debris.
Case’s Battery: It’s possible the case’s battery is depleted. Let it charge for an extended period.

LED Indicators Not Working:

If the LED indicators aren’t displaying the correct information:

Refer to the Manual: Consult the Skullcandy Sesh Evo user manual for specific LED behavior.
Reset: Try resetting the earbuds and the charging case.
Contact Support: If the issue persists, contact Skullcandy support for assistance.

Tips for Optimal Charging and Battery Health

Taking care of your Sesh Evo earbuds during charging can significantly extend their lifespan and ensure optimal performance. Here are some valuable tips:

Use the Correct Charger: While you can use any USB-C charger, using a charger that provides the correct voltage and amperage is recommended. Check the specifications for your Sesh Evo (usually found in the user manual) to determine the recommended charger output.
Avoid Overcharging: Although modern devices are designed to prevent overcharging, it’s still best practice to disconnect the earbuds and case once they’re fully charged. Leaving them plugged in for extended periods can potentially degrade the battery over time.
Don’t Let the Battery Drain Completely: Regularly charging your earbuds and case is better for battery health than letting them drain completely before recharging.
Store in a Cool, Dry Place: When not in use, store your earbuds and case in a cool, dry place away from direct sunlight and extreme temperatures.
Clean Regularly: Clean the charging contacts on both the earbuds and the case with a soft, dry cloth to remove any dust or debris that could interfere with charging.

Comparing Charging Methods: USB-C vs. Wireless Charging (sesh Evo)

The Sesh Evo earbuds do not support wireless charging. They are exclusively charged via the USB-C port on the charging case. While some higher-end Skullcandy earbuds might feature wireless charging, the Sesh Evo prioritizes a simple and effective wired charging solution. You’ll always use the provided USB-C cable to replenish the case’s power.

Here’s a comparison of charging methods in general (though not directly applicable to the Sesh Evo):

Feature	USB-C Charging	Wireless Charging
Charging Speed	Generally faster.	Generally slower.
Convenience	Requires a cable and a power source.	More convenient; just place the device on a charging pad.
Portability	Requires a cable, which adds to the bulk.	No cable needed; more portable.
Compatibility	Universal with USB-C devices.	Requires a compatible wireless charging pad.
Cost	Typically less expensive.	Can be more expensive, especially for charging pads.

As the Sesh Evo uses USB-C, you benefit from the faster and more reliable charging speeds that this method provides.

Extending the Life of Your Sesh Evo Earbuds

Proper charging practices are just one part of keeping your Sesh Evo earbuds in top shape. Here are additional ways to maximize their lifespan:

Protect from Moisture: The Sesh Evo earbuds are water-resistant (check the IP rating in the specifications, usually IP55), but they aren’t waterproof. Avoid submerging them in water or exposing them to excessive moisture.
Clean Regularly: Clean your earbuds and case regularly with a soft, dry cloth. You can also use a slightly damp cloth with mild soap to clean the earbuds, but be sure to dry them thoroughly before putting them back in the case.
Avoid Extreme Temperatures: Store and use your earbuds within the recommended temperature range to prevent battery damage and other issues.
Handle with Care: Avoid dropping or damaging the earbuds or the charging case.
Update Firmware: Keep your earbuds’ firmware updated to ensure optimal performance and address any potential bugs. Check the Skullcandy app (if available for your model) for firmware updates.
Proper Storage: When not in use, store your earbuds in the charging case to protect them from dust, debris, and physical damage.

Verdict

Charging your Skullcandy Sesh Evo earbuds is a simple process, but understanding the steps and the LED indicators will help you keep the music playing. By following the tips and troubleshooting advice outlined in this guide, you can ensure that your earbuds are always ready for your next listening session. Remember to charge regularly, take care of your devices, and refer to the user manual for specific details. Enjoy your music!

Recommended Products

Bestseller No. 1