How Do I Pair My Sesh Evo Earbuds: A Simple Guide

Disclosure: As an Amazon Associate, I earn from qualifying purchases. This post may contain affiliate links, which means I may receive a small commission at no extra cost to you.

Hey there! So, you’ve got yourself a pair of Skullcandy Sesh Evo earbuds – awesome choice! These little guys are packed with features and can deliver some serious sound. But before you can enjoy your favorite tunes or podcasts, you need to get them paired with your device. Don’t worry, it’s a super easy process, and I’m here to walk you through it step-by-step.

Whether you’re new to Bluetooth earbuds or just need a refresher, this guide will cover everything. We’ll look at the initial pairing process, how to reconnect if they disconnect, and even troubleshoot some common issues. I’ll break it down in a way that’s easy to understand, so you’ll be listening in no time.

Ready to get started? Let’s get your Sesh Evo earbuds connected and pumping out the jams!

Understanding Your Sesh Evo Earbuds

Before we jump into pairing, let’s get a quick overview of your Sesh Evo earbuds. These earbuds are designed for a seamless, wireless experience. They connect to your phone, tablet, or other Bluetooth-enabled devices, allowing you to listen to music, take calls, and use voice assistants without any wires getting in the way. They boast a comfortable fit, decent battery life, and are built to handle everyday use.

The Sesh Evo earbuds have a few key features that are important to know for pairing and general use:

Bluetooth 5.0: Provides a stable and reliable connection.
Auto-Pairing: Designed to automatically connect to your device once paired.
Touch Controls: Allow you to control music playback, answer calls, and adjust volume directly from the earbuds.
Water Resistant: Rated IP55, meaning they can withstand sweat and light rain.
Charging Case: Extends the battery life of your earbuds.

Knowing these basics will help you understand how the pairing process works and how to troubleshoot any potential issues.

Initial Pairing: The First Time Setup

Pairing your Sesh Evo earbuds for the first time is straightforward. Here’s a step-by-step guide to get you up and running:

Charge Your Earbuds and Case: Make sure both the earbuds and the charging case are fully charged before you start. This ensures you have enough power for the pairing process and initial use. You can check the battery level of the case by looking at the LED indicator on the front.
Take the Earbuds Out of the Case: Open the charging case and remove both earbuds. They should automatically enter pairing mode. You’ll likely see a flashing light on one or both earbuds, indicating they are ready to pair.
Enable Bluetooth on Your Device: On your phone, tablet, or other device, go to the Bluetooth settings. This is usually found in the settings menu. Make sure Bluetooth is turned on.
Search for Available Devices: Your device will start scanning for nearby Bluetooth devices.
Select Your Sesh Evo Earbuds: In the list of available devices, you should see “Sesh Evo” (or a similar name). Tap on it to select it.
Pair the Devices: Your device may ask you to confirm the pairing. Accept any prompts that appear. The earbuds should then connect to your device.
Listen and Enjoy: Once paired, you should hear a confirmation sound in your earbuds. Now, start playing music or a podcast, and enjoy the wireless audio experience.

If you followed these steps, congratulations! You’ve successfully paired your Sesh Evo earbuds. If you’re having trouble, don’t worry, we’ll cover troubleshooting below.

Reconnecting Your Sesh Evo Earbuds

Once you’ve paired your Sesh Evo earbuds with a device, they should automatically reconnect when you take them out of the charging case, provided Bluetooth is enabled on your device. However, if they don’t reconnect automatically, here’s how to manually reconnect:

Ensure Bluetooth is Enabled: Double-check that Bluetooth is turned on in your device’s settings.
Take Earbuds Out of the Case: Remove both earbuds from the charging case. They should power on automatically.
Check Your Device’s Bluetooth Menu: Go to your device’s Bluetooth settings and look for “Sesh Evo” in the list of paired devices.
Tap to Connect (if necessary): If “Sesh Evo” is listed but not connected, tap on it to initiate the connection.
Listen and Confirm: Once connected, you should hear a confirmation sound in your earbuds, and your device should indicate that the earbuds are connected.

If you’re still having trouble reconnecting, try the following:

Put the earbuds back in the charging case and close the lid, then take them out again. This can sometimes reset the connection.
Forget the Sesh Evo earbuds from your device’s Bluetooth settings and then re-pair them as if it were the first time.
Restart your device (phone, tablet, etc.).

Reconnecting should be a breeze most of the time, but these steps will help you get back to your music quickly if you encounter any issues.

Troubleshooting Common Pairing Issues

Sometimes, things don’t go as planned. Here are some common problems you might encounter while pairing your Sesh Evo earbuds and how to fix them:

Earbuds Not Appearing in the Bluetooth List

If your Sesh Evo earbuds aren’t showing up in your device’s Bluetooth list, try these steps:

Make Sure They’re in Pairing Mode: Confirm that the earbuds are in pairing mode (usually indicated by a flashing light). If they aren’t, put them back in the charging case, close the lid for a few seconds, then take them out again.
Check the Distance: Ensure the earbuds are within range of your device (typically within 33 feet or 10 meters). Walls and other obstructions can interfere with the Bluetooth signal.
Restart the Earbuds and Device: Turn off Bluetooth on your device, put the earbuds back in the case, and then restart both your device and the earbuds.
Check for Interference: Other Bluetooth devices or Wi-Fi routers can sometimes interfere with the signal. Try moving away from these sources.
Factory Reset (if necessary): If nothing else works, you might need to perform a factory reset of your Sesh Evo earbuds. (See instructions below).

One Earbud Not Connecting

If only one earbud is connecting, it usually indicates a problem with the connection between the earbuds themselves or with your device. Try these fixes:

Put Both Earbuds in the Case: Close the lid for a few seconds, then remove them again. This often resets the connection.
Check Earbud Charge: Ensure both earbuds are charged.
Forget and Re-Pair: Forget the Sesh Evo from your device’s Bluetooth settings and re-pair them.
Reset the Earbuds: If the above steps don’t work, reset your earbuds. (See instructions below).

Sound Issues

If you experience poor sound quality, intermittent audio, or other audio problems, try these troubleshooting steps:

Check the Bluetooth Connection: Ensure the earbuds are properly connected to your device.
Adjust the Volume: Make sure the volume is turned up on both your device and the earbuds.
Check for Obstructions: Ensure there are no physical obstructions between your earbuds and your device.
Restart the Device: Sometimes, a simple restart of your device can resolve audio issues.
Update Device Software: Make sure your device’s operating system is up to date.

Factory Resetting Your Sesh Evo Earbuds

A factory reset can resolve many pairing and connectivity issues. Here’s how to do it:

Place Earbuds in the Charging Case: Put both earbuds back in the charging case.
Close the Lid: Close the lid of the charging case.
Open the Lid and Remove One Earbud: Open the lid and remove one earbud.
Press and Hold the Button: Press and hold the button on the earbud for 10 seconds. You should see a flashing light.
Repeat on the Other Earbud: Repeat the same process with the other earbud.
Re-Pair: After resetting both earbuds, try pairing them with your device again.

This should reset the earbuds to their factory settings, clearing any previous pairing information and resolving most software-related problems.

Understanding the Touch Controls

Your Sesh Evo earbuds have touch controls that allow you to manage music playback, answer calls, and adjust the volume without having to reach for your device. Here’s a breakdown of the controls:

Play/Pause: Tap the touch control on either earbud once.
Answer/End Call: Tap the touch control on either earbud once.
Reject Incoming Call: Press and hold the touch control on either earbud for 2 seconds.
Volume Up: Tap the right earbud twice.
Volume Down: Tap the left earbud twice.
Track Forward (Next Song): Press and hold the right earbud for 2 seconds.
Track Backward (Previous Song): Press and hold the left earbud for 2 seconds.
Activate Voice Assistant: Tap the touch control on either earbud three times.

Customization Note: While these are the standard controls, the Skullcandy app (if supported by your device) may allow you to customize some of these functions. Check the app for more details.

Tips for a Better Bluetooth Experience

Here are some tips to ensure a smooth and enjoyable experience with your Sesh Evo earbuds:

Keep Your Device Updated: Make sure your phone, tablet, or other device has the latest operating system updates. These updates often include Bluetooth improvements.
Minimize Interference: Avoid using your earbuds in areas with a lot of Bluetooth or Wi-Fi devices, as this can cause interference.
Clean Your Earbuds: Regularly clean your earbuds to ensure optimal sound quality and prevent any connection issues. Use a soft, dry cloth to wipe them down.
Protect the Charging Case: Keep the charging case clean and protected, as it’s essential for charging and storing your earbuds.
Manage Your Bluetooth Connections: If you have multiple Bluetooth devices, make sure your earbuds are connected to the correct one.
Check for Skullcandy App Updates: Keep the Skullcandy app (if you use it) updated to take advantage of the latest features and bug fixes.

Maximizing Battery Life

Battery life is crucial for a great listening experience. Here are some tips to get the most out of your Sesh Evo earbuds:

Charge Regularly: Charge your earbuds and charging case regularly. Don’t wait until the battery is completely drained.
Store Properly: When not in use, store your earbuds in the charging case to protect them and keep them charged.
Limit Volume: Listening at high volumes can drain the battery faster. Consider listening at a moderate volume.
Turn Off When Not in Use: If you’re not using your earbuds for an extended period, turn off Bluetooth on your device or put the earbuds back in the case to conserve battery.
Check Case Battery: Regularly check the battery level of the charging case. A fully charged case will provide several additional charges for your earbuds.

What to Do If Your Sesh Evo Earbuds Still Won’t Pair

If you’ve tried all the troubleshooting steps and your Sesh Evo earbuds still won’t pair, don’t panic! Here are some additional steps to try, or options to consider:

Check the Skullcandy Website: Visit the Skullcandy support website. They have FAQs, troubleshooting guides, and may have specific instructions for your earbuds.
Contact Skullcandy Support: If you can’t find a solution online, contact Skullcandy customer support. They can provide personalized assistance and help you resolve more complex issues. Have your product details ready.
Check the Warranty: Review the warranty information that came with your earbuds. If they are still under warranty, you may be eligible for a replacement or repair.
Consider a Hardware Issue: In rare cases, there might be a hardware problem with the earbuds. If all else fails, a replacement might be necessary.

Don’t hesitate to reach out for help. Customer support is there to assist you, and they can often resolve issues that you can’t fix on your own.

Alternative Pairing Methods

While the standard Bluetooth pairing is the primary method, there aren’t typically alternative pairing methods for the Sesh Evo earbuds. However, here are some things to consider:

Check the Skullcandy App: The Skullcandy app (if supported by your device) might offer a pairing option or guide.
Consult the Manual: Refer to the user manual that came with your earbuds for any specific instructions or alternative methods.
Look for Firmware Updates: If the Skullcandy app is supported, check for firmware updates for your earbuds. Sometimes, updates can improve pairing and connectivity.

Final Verdict

Pairing your Skullcandy Sesh Evo earbuds is a straightforward process that allows you to enjoy wireless audio on the go. Following the steps in this guide, you should be able to connect your earbuds quickly and easily. Remember to keep your device’s Bluetooth enabled, ensure your earbuds are in pairing mode, and double-check your device’s settings. With a little patience, you’ll be enjoying your favorite music, podcasts, and calls in no time.

If you encounter any issues, don’t hesitate to refer back to the troubleshooting tips and consider reaching out to Skullcandy’s customer support for further assistance. Enjoy your music!

Recommended Products

Bestseller No. 1